1/2 & 3/4qtr HP. Above Ground Pumps for swimming pool / pond / spa / hot tub

Appropriate to the # number. Please be aware that this pump is "NON" self priming. This means that the pool water line has to be above the pump as this pump relies on gravity to push water into it. BOTH OF THESE MODELS CAN BE WALL MOUNTED. IN ORDER TO PROTECT FROM FLOODING OR IF SPACE IS AT A PREMIUM.

YOU CAN ROTATE THE PUMP PRE-FILTER INSPECTION BODY. TO BE UPRIGHT 180 DEGREES IF REQUIRED. PLEASE INDICATE WHAT SIZE PUMP FITTINGS YOU WANT US TO PUT IN WITH YOUR PUMP. WE NORMALLY PUT IN 1.5 (OR 48MM O/D) IF YOU WANT US TO PUT IN 50MM (METRIC) PLEASE LET US NOW. # CC2527 - 0.5HP(CC2527) pump(CE) - 15m?

# CC2528 - 3/4 horse power - 16m? If a manual is need please request one by messaging us. Pump can be placed below water line of pool but needs a check (one-way) valve. Placed above water line between pump and pool/pond. Can be used with salt water as long as it is left on 24/7 and if turned off, "O" rings etc must be cleaned with copious amounts of fresh water after switch off so as not to allow the salt to dry on "O" Rings etc.

L x W x H (cms). 52 x 18.5 x 25. 56 x 19 x 30. One way valves and other fittings, are available if needed, in our e-bay shop. We do not deliver to the Channel Islands, Isles of Scilly, Isle of Man, Western Isles, Hebrides, Orkney and Shetland, Under the same basis. Thanks for looking and your interest!