Clearwater TA Plus 1KG Swimming Pool Tub Spa Water Total Alkalinity Increaser

Swimming Pool Tub Spa Water Total Alkalinity Increaser. Low total alkalinity (TA) may cause pool or spa water to be corrosive and the pH level difficult to maintain. Total alkalinity should be maintained at between 80 - 150mg/l (ppm). Test the total alkalinity level of the pool or spa water and if it is below 80mg/1 (ppm) use TA PLUS to increase the level. Pre-dissolve the product in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1lt) of clean water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned on, preferably near to the water inlets to aid distribution. Wear eye and face protection and ensure granules are not blown back in to your face. Never mix with other chemicals including household cleaners or a dangerous reaction may occur. When pre-dissolving always add product to water and not vice versa. Handle products in a well-ventilated area, preferably outdoors. Ensure chemicals do not become damp in storage - store in a cool dry place.