Swimming pool / pond pump 1/2Hp or 0.5Hp 15m3/hr / 1.5 connectors or h/tails

CC2527 - 0.5Hp Pump with Pre-Filter. Please be aware that this pump is "NON" self priming. This means that the pool water line has to be above the pump as this pump relies on gravity to push water into it. THIS MODEL CAN BE WALL MOUNTED. IN ORDER TO PROTECT FROM FLOODING OR IF SPACE IS AT A PREMIUM.

YOU CAN ROTATE THE PUMP PRE-FILTER INSPECTION BODY. TO BE UPRIGHT 180 DEGREES IF REQUIRED. Pump comes with fittings i.

1.5 rigid pipe connectors supplied. Please let us know if you require flexible pipe fittings i. One way valves and other fittings, are available if needed, in our e-bay shop. If a manual is need please request one by messaging us. Pump can be placed below water line of pool but needs a check (one-way) valve.

Placed above water line between pump and pool/pond. Can be used with salt water as long as it is left on 24/7 and if turned off, "O" rings etc must be cleaned with copious amounts of fresh water after switch off so as not to allow the salt to dry on "O" Rings etc. L x W x H (cms).

52 x 18.5 x 25. 56 x 19 x 30.